職責描述：
1.負責汽車線束產品設計開發，客戶需求分析，客戶標準收集/研究及可行性分析
Responsible for automotive wiring harness design and development, customer requirement analysis, customer specification collection&study and feasibility analysis.
2.負責產品的概念設計、細化設計、公差分析、設計檢討、DFMEA制作、樣品制作、試生產及設計/產品驗證
Responsible for concept design, detail design, tolerance stack study,design review, DFMEA analysis, prototype/sample build, pilot run and DV/PV.
3.負責線束產品零部件選型，如連接器，端子，密封件，導線，卡釘，保護套，膠帶等；配合零部件設計工程師完成零部件設計
Responsible for component selection of harness product, such as connector, terminal, seal, wire/cable, clip, tube, tape; give support to component design engineer to finish component design.
4.負責完成線束的三維布線及線束二維圖紙，負責制定產品的驗證計劃并主導產品驗證測試過程
Responsible for harness 3D routine and 2D layout, responsible for product validation plan and take lead product validation test process.
5.主導項目階段的工程更改過程
Take lead product engineering change process during development stage.
6.支持項目報價及產品開發流程改進
Support for project quotation and product design process improvement.


任職要求：
1. 良好的英語讀寫能力，口語流利者優先
Good English in writing and reading, fluent oral English is preferred
2. 熟悉ISO/TS16949, 熟悉VDA優先
Good knowledge in ISO/TS16949, VDA is preferred
3. 熟練掌握3D建模，2D制圖，熟悉Catia軟件優先
Familiar wih 3D modeling, 2D drafting, Catia is preferred
4. 了解整車電氣拓?fù)浣Y(jié)構，電子電器架構相關知識。
Familiar with the vehicle networking protocol, electronic architecture
5. 熟悉線束產品行業標準及OEM標準和線束工藝技術
Familiar with harness product industry and OEM standard and process technology
6. 熟悉線束零部件的標準及選型，熟悉線束的試驗要求
Familiar with harness component, familiar with harness validation/test requirement
7. 熟悉ISO/TS16949, 熟悉VDA，APQP, PPAP, FMEA, SPC優先
Good knowledge in ISO/TS16949, VDA is preferred. Be familiar with APQP, PPAP, FMEA, SPC, etc

科絡普成立于1928年，是一家德國知名的，先進的家族企業， 在德國及世界各地有5000多員工。我們從一家首先定位于國內市場的廠家發展成為活躍于全球的企業，以盡可能地接近我們的客戶。我們?cè)诘聡?guó)、波蘭、突尼斯、墨西哥和中國建有生產基地以及另外23個代表處和服務中心確保我們向主要客戶和主要銷售市場提供盡可能好的服務。這些舉措明確了 我們的全球定位，使我們成為汽車工業最重要的供應商之一。